Previous Page  6 / 12 Next Page
Information
Show Menu
Previous Page 6 / 12 Next Page
Page Background

6

Many accessories are available for the 01 Series. With the basic mill, one can

equip it for metal-free grinding. Note, the same tanks can be used for the

01/HD-01 or the HDDM-01 modes. The 01/HD-01 series can be equipped

for grinding under inert gases and for cryogenic grinding. The special covers

fit all tank sizes (110cc, 750cc, and 1400cc). Most parts are interchangeable.

Each size tank does need its own shaft and arms, and arm lengths do vary

depending upon the size of media being used. There is also a special cooling

water jacket and tank with a valve at the bottom so one can discharge the

slurry and even hook-up a small pump for circulation.

Please see the list below of all accessories available.

Tank Options (approx. gross volume) —

For use with all 01 Series Attritors

Stainless steel

110cc, 750cc, 1400cc

Tefzel

®

-coated stainless steel

110cc, 750cc, 1400cc

Polyethylene

110cc, 750cc, 1400cc

Alumina

750cc, 1400cc

Zirconium oxide

750cc, 1400cc

Silicon nitride

750cc, 1400cc

Silicon carbide

750cc, 1400cc

Agitator Arms —

For use with 01 and HD-01 Models

The following arms can be installed in either stainless steel, plastic coated,

or zirconium oxide shafts:

Colmonoy

®

*

Stainless steel

Plastic coated, steel reinforced*

Tungsten carbide*

Silicon nitride

Zirconium oxide*

*Available for 110cc tanks.

Agitator Disks —

For use with HDDM-01 Models

Tool Steel (hardened)

Plastic

Stainless Steel (440C)

Zirconium oxide

Covers —

For use with 01 and HD-01 Models

2-piece aluminum, stainless steel or plastic

1-piece stainless steel with simplified, mechanical shaft seal with gas

inlet/outlet and charging port

1-piece stainless steel with Teflon floating seal, charging port, and vent for

grinding in liquid nitrogen (cryogenic grinding)

Covers —

For use with HDDM-01 Models

Stainless Steel Cover with Media Deflector & Floating Seal for HDDM-01

Discharge Valves

Cooling water jacket with bottom discharge valve — requires special tank

with openings —

For use with 01 and HD-01 Models

Cooling water jacket with side discharge valve and optional bottom plug

valve — for stainless steel tanks only —

For use with HDDM-01 Models

Special —

For use with 01 and HD-01 Models

Adapter for quick change of 110cc tanks (polyurethane or stainless steel)

Pumps For Circulation —

For use with all 01 Series Attritors

Air driven, explosion-proof

110V, 1/4 HP, variable speed

110V, 1/4 HP, variable speed, explosion-proof

Portable Stand w/Heavy-Duty Casters — For use with all

01 Series Attritors

COMPLETE LIST OF ACCESSORIES

Tefzel

®

is a registered trademark of E.I. DuPont deNemours Co., Inc.

Colmonoy

®

(a nickel-based alloy) is a registered trademark of Wall Colmonoy Corporation.

01 Series Accessories

01 SERIES ACCESSORIES

1. Silicon Carbide, 1400cc

2. 316 Stainless Steel, 1400cc

3. Ceramic (99.5% Alumina), 1400cc

4. UHMW (Polyethylene), 1400cc

5. Zirconium Oxide, 750cc

6. 316 Stainless Steel, 110cc

7. Tefzel-Coated SS, 750cc

1. One-Piece Stainless Steel Cover with Teflon Seal and Vent for Cryogenic

Grinding with Liquid Nitrogen

2. Stainless Steel Cover with Media Deflector and Floating Seal for HDDM-01

3. Special Adapter for Quick-Change of 110cc Tanks

4. One-Piece Stainless Steel Cover with MECO Shaft Seal, Gas Inlet/Outlet, and

Charging Port for Grinding Under Inert Gas

5. Two-Piece Plastic Cover

6. Two-Piece 304 Stainless Steel Cover

1. SS Shaft with Lub-R (Plastic) Disks and Spacers, 1400cc

2. SS Shaft with 440C SS Disks and Spacers, 750cc

3. Halar-Coated SS Shaft with Zirconium Oxide Disks and Lub-R (Plastic) Spacers,

1400cc

1. Plastic-Coated Stainless Steel Shaft with Zirconium Oxide Arms, 110cc

2. Stainless Steel Shaft with Tungsten Carbide Arms, 750cc

3. Zirconium Oxide Shaft with Zirconium Oxide Arms, 750cc

4. Plastic-Coated Shaft with Xylethon Sleeved Arms, 750cc

5. Stainless Steel Shaft with Colmonoy Arms, 750cc

6. Stainless Steel Shaft with 440C SS Arms, 1400cc

1

2

3

4

5

6

7

1

2

3

4

6

5

1

2

3

4

5

6

1

2

3

TANKS

COVERS

AGITATOR

DISKS

SHAFTS/ARMS